Layer Up Ceramics

• Home
• Products
• Additional Info

30 Triangles, Layer Up Ceramics

This pendant lamp is made with translucent porcelain using a clay 3D printer.
Ceramic lampshade dimensions: Height: 6.5” Width: 6”.
Accepts standard Edison style bulbs. Hanging hardware with 15’ cord & switch are included.... More Info Less Info







This translucent porcelain lamp was made using machine-assisted coil building. It appears that gravity is causing 30 triangles to droop upward on the 6.5” round pleated shape. I use a modified 3D printer to print clay that I have prepared by wedging in extra water with my hands until I detect the correct feel for the viscosity or thickness of the clay.

The spiral coils of the lamp are printed in a single layer using a 5mm nozzle. After final inspection and clean-up, I fire the lamps cone 6. The lamps as shown do not have glaze, but if you would like a shiny finish or to change the color of the lamp, please ask about adding a coat of glaze.

The lamps can be hung using the included hardware, and the cord is 15 feet long with an ON-OFF switch. It accepts a standard Edison style bulb (incandescent / LED / CFL / halogen). Choose your preferred light color to give your lamp a beautiful soft warm light, or a bright white light (bulb not included).



42 Waves, Layer Up Ceramics

This pendant lamp is made with translucent porcelain using a clay 3D printer.
Ceramic lampshade dimensions: Height: 6.5” Width: 5.5”.
Accepts standard Edison style bulbs. Hanging hardware with 15’ cord & switch are included.... More Info Less Info







This translucent porcelain lamp was made using machine-assisted coil building. It appears that 42 waves are attached to the 6.5” round pleated shape.

I use a modified 3D printer to print clay that I have prepared by wedging in extra water with my hands until I detect the correct feel for the viscosity or thickness of the clay.

The spiral coils of the lamp are printed in a single layer using a 5mm nozzle. After final inspection and clean-up, I fire the lamps cone 6. The lamps as shown do not have glaze, but if you would like a shiny finish or to change the color of the lamp, please ask about adding a coat of glaze.

The lamps can be hung using the included hardware, and the cord is 15 feet long with an ON-OFF switch. It accepts a standard Edison style bulb (incandescent / LED / CFL / halogen). Choose your preferred light color to give your lamp a beautiful soft warm light, or a bright white light (bulb not included).



44 Mushrooms (Large), Layer Up Ceramics

This pendant lamp is made with translucent porcelain using a clay 3D printer.
Ceramic lampshade dimensions: Height: 7” Width: 6.5”.
Accepts standard Edison style bulbs. Hanging hardware with 15’ cord & switch are included.... More Info Less Info







This translucent porcelain lamp was made using machine-assisted coil building. It appears that 44 mushrooms are attached to the 7” round bulb shape.

I use a modified 3D printer to print clay that I have prepared by wedging in extra water with my hands until I detect the correct feel for the viscosity or thickness of the clay.

The spiral coils of the lamp are printed in a single layer using a 5mm nozzle. After final inspection and clean-up, I fire the lamps cone 6. The lamps as shown do not have glaze, but if you would like a shiny finish or to change the color of the lamp, please ask about adding a coat of glaze.

The lamps can be hung using the included hardware, and the cord is 15 feet long with an ON-OFF switch. It accepts a standard Edison style bulb (incandescent / LED / CFL / halogen). Choose your preferred light color to give your lamp a beautiful soft warm light, or a bright white light (bulb not included).



44 Mushrooms (Small), Layer Up Ceramics

This pendant lamp is made with translucent porcelain using a clay 3D printer.
Ceramic lampshade dimensions: Height: 5.5” Width: 6”.
Accepts standard Edison style bulbs. Hanging hardware with 15’ cord & switch are included.... More Info Less Info







This translucent porcelain lamp was made using machine-assisted coil building. It appears that 44 mushrooms are attached to the 5.5” round bulb shape.

I use a modified 3D printer to print clay that I have prepared by wedging in extra water with my hands until I detect the correct feel for the viscosity or thickness of the clay.

The spiral coils of the lamp are printed in a single layer using a 5mm nozzle. After final inspection and clean-up, I fire the lamps cone 6. The lamps as shown do not have glaze, but if you would like a shiny finish or to change the color of the lamp, please ask about adding a coat of glaze.

The lamps can be hung using the included hardware, and the cord is 15 feet long with an ON-OFF switch. It accepts a standard Edison style bulb (incandescent / LED / CFL / halogen). Choose your preferred light color to give your lamp a beautiful soft warm light, or a bright white light (bulb not included).



54 Triangles, Layer Up Ceramics

Pendant lamp made from 3D printed Porcelain. 6.5" diameter by 7" tall. Choose from 5 different hanging options.... More Info Less Info







This translucent porcelain lamp was made using machine-assisted coil building. It appears that gravity is causing 54 triangles to droop upward on the 6.5” round pleated shape. I use a modified 3D printer to print clay that I have prepared by wedging in extra water with my hands until I detect the correct feel for the viscosity or thickness of the clay.

The spiral coils of the lamp are printed in a single layer using a 5mm nozzle. After final inspection and clean-up, I fire the lamps cone 6. The lamps as shown do not have glaze, but if you would like a shiny finish or to change the color of the lamp, please ask about adding a coat of glaze.

The lamps can be hung using the included hardware, and the cord is 15 feet long with an ON-OFF switch. It accepts a standard Edison style bulb (incandescent / LED / CFL / halogen). Choose your preferred light color to give your lamp a beautiful soft warm light, or a bright white light (bulb not included).



72 Shells, Layer Up Ceramics

This pendant lamp is made with translucent porcelain using a clay 3D printer.
Ceramic lampshade dimensions: Height: 7” Width: 6”.
Accepts standard Edison style bulbs. Hanging hardware with 15’ cord & switch are included.... More Info Less Info







This translucent porcelain lamp was made using machine-assisted coil building. It appears that 72 shells are attached to the 7” hexagon column.

I use a modified 3D printer to print clay that I have prepared by wedging in extra water with my hands until I detect the correct feel for the viscosity or thickness of the clay.

The spiral coils of the lamp are printed in a single layer using a 5mm nozzle. After final inspection and clean-up, I fire the lamps cone 6. The lamps as shown do not have glaze, but if you would like a shiny finish or to change the color of the lamp, please ask about adding a coat of glaze.

The lamps can be hung using the included hardware, and the cord is 15 feet long with an ON-OFF switch. It accepts a standard Edison style bulb (incandescent / LED / CFL / halogen). Choose your preferred light color to give your lamp a beautiful soft warm light, or a bright white light (bulb not included).



Bow Legged Table Lamp, Layer Up Ceramics

3D printed porcelain or stoneware table lamp. Several lampshade choices available including custom dyed shades. Looks great with shades measuring 13" diameter, but a 10" diameter shade also fits.

Total Height = 21" (53 cm)
Ceramic-only height 8.5" (22 cm)... More Info Less Info







I use a modified 3D printer to print clay that I have prepared by wedging in extra water with my hands until I detect the correct feel for the viscosity or thickness of the clay. The spiral coils of the lamp are printed in a single layer using a 5mm nozzle. After final inspection and clean-up, I fire the lamps cone 6. The lamps have rubber feet on the bottom so they will not scratch or slide around. The cord is 8 feet long with an ON-OFF switch on the fixture. It accepts a standard Edison style bulb (incandescent / LED / CFL / halogen). Choose your preferred light tempearature to give your lamp a beautiful soft warm light, or a bright white light (bulb not included).

I designed this lamp to fit a 13" lampshade but a 10" diameter shade also fits.  Several glaze options available. Two shape varieties are available, one with smooth edges and one with wavy edges.

Total Height = 21"  (53 cm)
Ceramic-only height 8.5" (22 cm)


Incense Burner, Layer Up Ceramics
A two-part burner for cone or stick type incense. Smoke comes from the small hole on top, but also from the triangular holes all over the decoration.
Height & Width: 4" (10cm)
Also included with each item: A package of 10 incense cones.... More Info Less Info



A 3D printed incense burner made from porcelain or stoneware. Hand glazed and fired to Cone 6. The inside of the burner is glazed black so incense residue does not show. Dishwasher safe.


Pair of Espresso Cups, Layer Up Ceramics

Height 2.25" tall (5.5cm)
Length 4" with handle (10cm)
1/3 cup (80 mL)
... More Info Less Info







A pair of 3D printed porcelain or stoneware espresso cups. Different glaze combinations available

Height 2.25" tall (5.5cm)
Length 4" with handle (10cm)
1/3 cup (80 mL)



Sea Urchin Table Lamp, Layer Up Ceramics

3D printed porcelain or stoneware table lamp. Several lampshade choices available including custom dyed shades. Looks great with shades measuring 10" diameter, but a 13" diameter shade also fits.

Total Height = 16.5" (42 cm)
Ceramic-only height 6" (15 cm)... More Info Less Info







This table lamp whose base resembles a sea urchin is made with either stoneware or porcelain using a clay 3D printer. Several glaze options are available.

Ceramic lampshade dimensions: Height: 6.5” Width: 6”. 

Accepts standard Edison style bulbs.

I use a modified 3D printer to print clay that I have prepared by wedging in extra water with my hands until I detect the correct feel for the viscosity or thickness of the clay. The spiral coils of the lamp are printed in a single layer using a 5mm nozzle. After final inspection and clean-up, I fire the lamps cone 6. The lamps have rubber feet on the bottom so they will not scratch or slide around. The cord is 8 feet long with an ON-OFF switch on the fixture. It accepts a standard Edison style bulb (incandescent / LED / CFL / halogen). Choose your preferred light tempearature to give your lamp a beautiful soft warm light, or a bright white light (bulb not included).I designed this lamp to fit a 10" lampshade but a 13" diameter shade also fits.  Several glaze options available.

 

Total Height = 16.5" (42 cm)

Ceramic-only height 6" (15 cm)

Mediums